Overview:
Heavy-Duty Transfer Pump
High pressure and high volume double acting grease pump for use in transfer applications. These pumps can be used with all types of grease up to NLGI-2.
Pumps can be mounted to 120 lb and 400 lb open drums using an adequate drum cover and follower plate or to various types of grease bins and other containers. Grease bins normally have a 3” Cam Lock to which pump can be connected.
8” Air motor
Mechanically actuated air valve with only three moving parts and no springs. 8" effective area for maximum pumping power
Efficient air exhaust
No ice forming, no stalling pump operation
Long life packings
Anti-corrosion, hardened plunger and cartridge packings assembly designed for low friction.
High quality materials
Low friction polyurethane and UHMWPE seals, hard chromed steel, fluid plunger and steel valves for fewer repairs.
Ductile cast iron pump body
For superior properties
Pump Inlet Valve
Chop-check priming valve, assists the entry of heavy and sticky grease
Product Specifications:
| Pump Pressure Ratio |
35:1 |
| Maximum Free Flow Rate |
35 lb/min (16 kg/min) |
| Air Pressure Operating Range |
20 to 100 psi (1.5 - 7 bar) |
| Maximum Outlet Pressure |
3,500 psi (245 bar) |
| Air Motor Effective Diameter |
8” (200 mm) |
| Air Motor Stroke |
4” (100 mm) |
| Air Consumption |
35 scfm (1.000 Nl/min) |
| Air Inlet |
1/2" NPTF |
| Fluid Outlet |
1" NPTF |
| Wetted Materials |
Cast iron, hard chromed steel, carbon steel, zinc plated steel, NBR, fillet PTFE, polyurethane, POM |
| Noise Level |
Pump noise level meets OSHA requirements at all recommended operating air pressures |